Skip to content

Costs & Pricing

Flat Roof Cost in Calgary: Torch-On vs TPO vs EPDM (2026)

Roof Replacement Calgary·Updated November 2026·4 min read

Published Canadian figures for 2026 put flat roof replacement at about $15 to $25 per sq ft installed for torch-on (modified bitumen), $12 to $18 for TPO and $11 to $17 for EPDM rubber. On Calgary homes, flat and low-slope roofs are most common on infills, garages, porches and additions.

Calgary city buildings seen across open parkland
Calgary city buildings seen across open parkland. Stock photo: Kyler Nixon / Unsplash

Price by material

Torch-on (2-ply SBS modified bitumen): about $15 to $25 per sq ft installed. TPO (single-ply membrane): about $12 to $18 per sq ft. EPDM (rubber): about $11 to $17 per sq ft.

These are Renoquotes' 2026 Canada-wide ranges, not a quote. Your roofer will price your roof in writing.

What moves the price

Tear-off of old layers, rotten deck boards, tapered insulation to fix ponding, new drains or scuppers, flashing up walls and parapets, and access for materials all add cost. Small roofs cost more per sq ft because setup is the same whatever the size.

Which membrane suits Calgary

All three handle cold when installed properly. Torch-on is tough and common on residential flat roofs. TPO is light-coloured and heat-welded at the seams. EPDM stays flexible in the cold. The detailing at edges, drains and walls matters more than the brand.

Signs a flat roof is due

Water pooling for more than a couple of days after rain, blisters or splits in the membrane, open seams, and stains on the ceiling below. Ponding is the biggest enemy of a flat roof, so fixing the slope is often part of the job.

What you get for the price

The standard we ask of every roofer we refer you to

The roofer does the work, not us. Ask for each of these in your written quote and contract.

  • A roofer with WCB Alberta coverage (clearance letter on request) and liability insurance (certificate on request)
  • An Alberta prepaid contracting licence if they sell away from their office and take any money before the work is finished
  • A written quote that lists what will be done, the materials and the price
  • Manufacturer-approved installation, so the shingle warranty and any Class 4 rating stay valid
  • Photos of the problem before work starts, and of the finished work
  • Site left clean: old shingles, nails and debris taken away, with a magnet sweep of the yard
  • A walk-through of the finished job before final payment

Before and after photos, and a written scope

You get photos of what was wrong and what was done, and a written scope before anything starts, so you know exactly what you are paying for.

Insured roofer with WCB Alberta coverage, liability certificate on request

Questions people ask

Use the per sq ft ranges as a guide: about $11 to $25 per sq ft installed depending on the membrane. Small roofs sit at the top of the range per sq ft.

Published November 18, 2026.

More tips